Electrical Bearing Damage

Using variable frequency drives (VFDs or inverters) to control the speed of motors large and small is not only a flexible, cost-effective means of improving process/system control, it can also greatly reduce energy costs.

But VFDs have their drawbacks.  They can induce voltages on the shafts of the motors they control.  Without an alternate path to ground, these VFD-induced voltages will discharge through motor bearings causing electrical discharge machining (EDM) that blasts pits in bearing and race surfaces.  This process eventually leads to frosting and fluting (washboard-like ridges on the bearing race), and bearing failure — often in as little as 3 months!

While some large motors can be repaired on site, many must be pulled out of service, loaded onto a truck (often requiring a crane), and transported to a motor shop for repairs.  This can be a time-consuming and very expensive process.  And the larger the motor, the greater the cost of replacing damaged bearings.

But the cost of repairing motors often pales in comparison to the staggering costs of downtime and lost production.  Larger motors are typically used in high volume processing applications, where the cost of every minute of lost production is greater.

AEGIS® PRO Series Rings protect medium-voltage motors, generators, and turbines, as well as large-frame low-voltage AC motors (500 HP or greater) and DC motors (300 HP or greater).  PRO Rings are vailable in solid- and split-ring versions for shaft diameters from 2.5″ (50 mm) to 31.5″ (800 mm). They have 6 rows of conductive microfibers that completely encircle the motor shaft, providing millions of contact points that channel harmful shaft voltages away from bearings and safely to ground.

Solid PRO Rings are ideal for installation on new motors before they are put into service or on older motors when they are repaired. Split PRO Rings come in mating halves that slide around the shafts of coupled motors for fast, easy field installation.

There’s even an AEGIS® PRO Ring for protecting and monitoring remotely located or hard-to-access motors. The AEGIS® PROMR combines an AEGIS® PRO Ring with an AEGIS® monitoring ring (separated by an insulated phenolic spacer). It provides bearing protection and remote monitoring in a single, compact unit.  And Universal Mounting Brackets — designed to accommodate shaft shoulders, slingers, or other end bell protrusions — simplify and speed the installation of any size PRO Series Ring.

For horizontally mounted motors with single-row radial ball bearings at both ends of the motor, best practices include:
• At the non-drive end: Isolate the bearings using an insulated sleeve or coating; or install insulated ceramic or hybrid bearings to disrupt circulating currents.
• At the drive end: Install one AEGIS® PRO Bearing Protection Ring either internally (on the back of the bearing cap) or externally (on the motor end bracket).
• Whether the ring is installed internally or externally, be sure to apply AEGIS® Colloidal Silver Coating to the motor shaft where the ring’s conductive microfiber will make contact.
• For low- or medium-voltage motors where both bearings are insulated, install one AEGIS® Ring, preferably on the drive end to protect the bearings of attached equipment (e.g., gearbox, pump, fan bearings, etc.).

For more information on AEGIS® PRO Series Rings, see the PRO Series product page. You can also read an ROI analysis of PRO Rings, or peruse our case studies on how PRO Rings solved real-life problems in a number of applications.

AEGIS® Shaft Voltage Tester™ Digital Oscilloscope to Test VFD-Controlled Motors for Damaging Shaft Voltages

Industrial motors controlled by variable frequency drives (VFDs) are at risk of electrical bearing damage. The new AEGIS® Shaft Voltage Tester™ Digital Oscilloscope makes it easier than ever to check in-service motors for damaging VFD-induced shaft voltages and head off bearing damage and costly unplanned equipment downtime. Read the rest of the article…


Today, VFDs are used to provide precise control of a wide range of processes and process variables in manufacturing applications.

By allowing motors to run at less than full speed, VFDs can save energy — often 30% or more. But they also offer other benefits. They can improve equipment and machinery uptime, reduce switchgear and cabling costs, and enable more precise process control. As a result, they can improve productivity, quality, and profitability. But VFDs can cause unplanned motor bearing failures — often in as little as three months.

VFDs Improve Process Control…

9When used to control conveyors — belts or overhead lines — VFDs allow line balancing for optimized production and minimal idle time. With their rapid acceleration and deceleration capability, VFDs can also minimize transfer times between production cells. And by providing non-emergency stop and start control, VFDs can also be used to gently slow the speed of inclined conveyors.

For processes that could run at full uncontrolled speed (such as extrusion), VFDs offer greater control by eliminating variations in line voltage or frequency that could cause unwanted variations in the product itself.

VFDs also improve the efficiency of machines that control process variables in industrial production processes such as the speed of heating blowers and cooling fans, air compressors, assembly lines, quench lines, filling equipment, wire drawing equipment, etc.

Rather than throttling or braking fixed-speed motors, VFDs control motor speed by controlling the amount of power to the motor itself. And by varying the amount of power to the motor according to precise time curves, VFDs can provide soft starting and stopping — smooth ramp ups and slow downs of machines to reduce wear-and-tear and extend machine life.

And by limiting the amount of inrush current to motors, VFDs can also extend motor life.

And yet, the most impressive benefit from the use of VFDs may well be the energy savings they produce. According to a U.S. Department of Energy study, approximately 25% of industrial motor system energy usage was for pumps, and another 14% was for fans. Rather than diverting, redirecting, or throttling the output of motors that power these devices, VFDs provide a way of precisely matching motor output to load. And the benefits of VFDs extend beyond manufacturing systems to plant/facility systems such as HVAC and air handling systems.

But VFDs Damage Motor Bearings

But despite all the control and energy saving benefits they offer, VFDs can damage the motors they control. VFDs produce voltages on the shafts of the motors they control — voltages that can discharge through motor bearings, causing electrical discharge machining (EDM) pitting, frosting, and fluting failure.



AEGIS® Rings Protect Motor Bearings from VFD Damage

To protect process and facility system motors and prevent crippling, costly downtime, VFD-driven motors need proven long-term bearing protection from damaging VFD-induced shaft voltages.

Proven in millions of installations worldwide, AEGIS® Shaft Grounding Rings channel damaging shaft currents away from bearings and safely to ground.

AEGIS® SGR Rings are available in solid- or split-ring versions, and also as uKITs with mounting brackets that simplify installation on motors with shaft shoulders or end bell protrusions.

For medium-voltage motors and large low-voltage motors with shafts to 30” in diameter, AEGIS® PRO Series Rings also come in solid- and split-ring versions, and may also be mounted on universal mounting brackets.

AEGIS® solid rings are designed for installation on new motors before they are put into service, and split rings are ideal for field installation on in-service motors because they eliminate the need to decouple motors from attached equipment.

In addition, a large and growing number of motor manufacturers now offer motors with AEGIS® Rings factory installed.

For more information on the types of bearing damage VFDs can cause, click here.

For an application story on how AEGIS® Rings solved the ongoing problem of bearing damage to a 1000 HP transfer motor at a pulp and paper plant, click here.

For a list of manufacturers that offer motors with AEGIS® Rings factory installed, click here.

Excellent article on the many things which must be looked out for wen handling or installing bearings in electric motors. Published in the M+R (maintenance + Reliability) section of Maintenance Technology Magazine, the article, also available on line at http://www.maintenancetechnology.com/2016/09/handle-bearings-care/  lists 9 different conditions or practices and gives great advice on each. Of course, each section is a topic in and of its self and the one I would like to discuss in some more depth is on:

Electric Current Arcing:


Shaft Voltage Discharge

Shaft Voltage Discharge

Most pitting in a motor’s bearings comes from one of 2 sources: (1) Capacitive coupled voltage from the stator to rotor through parasitic capacitance on all motors operated by a variable frequency drive (VFD)from small 1 HP to the largest medium voltage motors and (2) high frequency circulating currents which can occur on motors over 100 HP. Separate mitigation is necessary to protect the bearings from these two sources of bearing currents.

The phenomenon for the creation of electrical discharges is similar for both. Essentially the voltage on the motor’s shaft creates a potential high enough to overcome the dielectric of the oil film in the motor’s bearings. When this happens an electrical arc shoots through from the inner race via the rolling element to the outer race which is connected to ground.

The energy in this arc is great enough to melt the hardened bearing steel and create an electrical discharge machining (EDM) pit in the bearing race. The steel surface melts and the metal hardens on the rim of the EDM pit. Then the rolling element can either deform the bearing race surface or break the metal particle and contaminate the bearing. Last but not least, the lubrication burns and deteriorates.

This process can occur MILLIONS of times per hour and after just a short while the bearing surface is pitted and a phenomenon known as “fluting” starts. This is a washboard type pattern along the bearing race creating vibration, heat and eventual bearing failure.

How do we stop this from happening?

Motors up to 100 HP

Motors up to 100 HP

Motors over 100 HP

Motors over 100 HP

First: Download the AEGIS Bearing Protection Handbook!

Low-Voltage Motors up to 100 HP: Install AEGIS® Shaft Grounding Rings for these motors usually on the drive side, either internally or externally.

Motors over 100 HP: Install one AEGIS® Shaft Grounding Ring on the drive end AND and insulated bearing on the non-drive end opposite the shaft grounding ring which prevents circulating currents that may be present in addition to capacitive induced shaft voltage.

Learn About Electrical Bearing Damage and How to Prevent It… While Enjoying Lunch on Us!

Lunch-and-learn presentations should be educational, not simply promotional. To benefit those who commit their time to them, lunch-and-learns should address topics that are not well understood and should provide the latest information on them as well as solutions to problems. And we know from experience that shaft voltages and the damage they can cause to motor bearings result in unplanned, unwanted, and expensive downtime. So, learning why they occur and how to prevent them is critical to design engineers and to plant maintenance people.

The problem is that the damage caused by VFD-induced shaft currents manifests itself as physical damage. And all too often those who deal with such damage assume it was caused by poor shaft alignment, inadequate lubrication, or other physical factors.

When a variable frequency drive (VFD or inverter) is used to control a motor, it alters the waveform of the power to the motor. VFDs change balanced sine wave power into a series of unbalanced positive and negative pulses that create capacitively coupled common mode voltage on the shaft of the motor. Without a low resistance path to ground, this voltage will discharge through the motor’s bearings. These voltage discharges cause electrical discharge machining in the form of pitting (tiny fusion craters in metal surfaces), frosting (widespread pitting), and fluting (washboard-like ridges in the walls of the bearing race resulting from the operational frequency of the VFD).

Without proven long-term bearing protection, these discharges can destroy motor bearings — often in as little as 3 months!

At AEGIS®, we have been educating motor users, motor repair shops, plant maintenance personnel, specifying engineers, and contractors on the causes and prevention of electrical bearing damage for years. And through the years we have come across more than a few products that claim to protect against electrical bearing damage, but don’t actually live up to these claims. We know what works and what doesn’t. And because we have tested them, we can tell you where and how they fall short.

We have also developed best practices for diagnosing electrical bearing damage and preventing it in motors large and small, low or medium voltage. We have even detailed these best practices in a 56-page Bearing Protection Handbook that discusses in detail the causes of electrical bearing damage, how to diagnose it, and step-by-step best practices for protecting motors from it.










Yet, despite these efforts to inform and educate motor users, we still find many who are unaware that the problem even exists or are unsure why or how to address it.

So if you would like to learn about the causes of electrical bearing damage and best practices for preventing it, we have a 1-hour presentation on the subject. And we would welcome the opportunity to make this presentation to as many of your people as you would like — from a handful to a room full — at whatever time you like. We’ll even bring lunch or other refreshments.

To request a Lunch-and-Learn training at your facility, click here.